MasterEmaco® S466CI

Get a QuoteIn Stock - Discounted Pricing - Truckload PricingCall: 1.800.231.2908

Flowable structural-repair concrete with integral corrosion inhibitor

Description

MasterEmaco® S466CI  is a rheoplastic, pourable, shrinkage-compensated repair concrete. It has a unique formulation that provides excellent bond, resistance to sulfates and chlorides, high electrical resistivity, low permeability, high-compressive strengths, and protection from corrosion.

Yield

Approximately 0.43 ft3 (0.012 m3), which will cover approximately 5.0 ft2 (0.46 m2) at a 1" (25 mm) depth before waste.

Packaging

55 lb (25 kg) multi-wall bags 3,300 lb (1,500 kg) bulk bags available by special order

Shelf Life

18 months when properly stored

Storage

Store in unopened containers at 60 to 80° F (16 to 27° C) in clean, dry conditions.

Where to Use - APPLICATION

  • Horizontal and formed vertical or overhead concrete repairs

  • Bridges, parking garages, and tunnels

  • Piers, navigation locks, dams, sea walls, and other marine structures

  • Balconies

How to Apply - Surface Preparation

CONCRETE

1. Perform surface preparation in compliance with ICRI Technical Guideline No. 03730 “Guide for Surface Preparation for the Repair of Deteriorated Concrete Resulting from Reinforcing Steel Corrosion.”

2. Remove all unsound or delaminated concrete, providing a minimum of 1/4" (6 mm) substrate profile and 3/4" (19 mm) clearance behind corroded reinforcing steel.

3. Sawcut the perimeter of the area being repaired to a minimum depth of 1" (25 mm) to prevent feather edges. Do not cut the reinforcement.

4. After removal of concrete but before placement, mechanically abrade the concrete surface to remove all bond-inhibiting materials and to provide additional mechanical bond. Do not use a method of surface preparation that will fracture the concrete. Verify the absence of microcracking or bruising in accordance with ICRI Guideline No. 03732.

5. Unless a bonding agent will be used, presoak the prepared concrete surface to a saturated surface-dry (SSD) condition.

Features - Benefits

  • Contains an integral corrosion inhibitor - Suitable for exterior applications

  • One component - Easy mixing and handling

  • Low permeability - Resists moisture and chloride intrusion

  • Freeze/thaw and sulfate resistant - Creates durable repairs

  • Abrasion resistant - Excellent protection from vehicular traffic

  • Excellent workability - High slump and good pumpability for formed applications

  • Shrinkage compensated - Reduces stress at the bondline

MasterEmaco® S466CI Full Documentation

MasterEmaco® S466CI is also known as: S 466 CI and masteremaco s 466.

Home > Products > MasterEmaco® S466CI (Formerly: Emaco S66)
Robert L Rowan Logo

Questions?

For over 50 years we have solved problems for the oil and gas, petrochemical, chemical process, refining, and paper industries.

How Can we Help You?
Phone: 800.231.2908
Email: Send us an email